Skip to main content

Synology NAS

Synology NAS routers are incredibly easy to use and can be combined into a single mesh network. You can manage your network remotely anytime, anywhere. You can also configure AdGuard DNS directly on the router.

Use your router admin panel​

Use these instructions if your Keenetic router does not support DNS-over-HTTPS or DNS-over-TLS configuration:

  1. Open the router admin panel. It can be accessed at 192.168.1.1 or 192.168.0.1.
  2. Enter the administrator username (usually, it’s admin) and router password.
  3. Open Control Panel or Network.
  4. Select Network Interface or Network Settings.
  5. Select your Wi-Fi network or wired connection.
  6. Choose Manual DNS. Select Use These DNS Servers or Specify DNS Server Manually and enter the following DNS server addresses:
    • IPv4: 94.140.14.49 and 94.140.14.59
    • IPv6: 2a10:50c0:0:0:0:0:ded:ff and 2a10:50c0:0:0:0:0:dad:ff
  7. Save the settings.
  8. Link your IP (or your dedicated IP if you have a Team subscription).