Skip to main content

FritzBox

FRITZ!Box provides maximum flexibility for all devices by simultaneously using the 2.4 GHz and 5 GHz frequency bands. All devices connected to the FRITZ!Box are fully protected against attacks from the Internet. The configuration of this brand of routers also allows you to set up encrypted Private AdGuard DNS.

Configure DNS-over-TLS​

  1. Open the router admin panel. It can be accessed at fritz.box, the IP address of your router, or 192.168.178.1.
  2. Enter the administrator username (usually, it’s admin) and router password.
  3. Open Internet or Home Network.
  4. Select DNS or DNS Settings.
  5. Under DNS-over-TLS (DoT), check Use DNS-over-TLS if supported by the provider.
  6. Select Use Custom TLS Server Name Indication (SNI) and enter the AdGuard Private DNS server address: {Your_Device_ID}.d.adguard-dns.com.
  7. Save the settings.

Use your router admin panel​

Use this guide if your FritzBox router does not support DNS-over-TLS configuration:

  1. Open the router admin panel. It can be accessed at 192.168.1.1 or 192.168.0.1.
  2. Enter the administrator username (usually, it’s admin) and router password.
  3. Open Internet or Home Network.
  4. Select DNS or DNS Settings.
  5. Select Manual DNS, then Use These DNS Servers or Specify DNS Server Manually, and enter the following DNS server addresses:
    • IPv4: 94.140.14.49 and 94.140.14.59
    • IPv6: 2a10:50c0:0:0:0:0:ded:ff and 2a10:50c0:0:0:0:0:dad:ff
  6. Save the settings.
  7. Link your IP (or your dedicated IP if you have a Team subscription).