Skip to main content

UniFi

The UiFi router, commonly known as the Ubiquiti UniFi series, has a number of advantages that make it particularly suitable for home, business, and enterprise environments.

The newer UniFi firmware recently added support for DNS-over-HTTPS. UniFi refers to this feature as Encrypted DNS.

Configurar DNS-over-HTTPS​

Follow these instructions if your UniFi router supports DNS-over-HTTPS.

UiFi routers use a DNS Stamp URL to specify the DNS-over-HTTPS URL. This URL must be calculated using your private DNS-over-HTTPS URL.

Obtain the DNS-over-HTTPS URL that is used to calculate the DNS Stamp URL.

  1. Go to the AdGuard DNS Private Dashboard.
  2. Proceed to Encrypted DNS → Custom and enter the following DNS server settings:
    • Device type: 'Router'
    • Device brand: 'Unifi'
    • Device name: Use your Unifi device name
  3. Click Next.
  4. Scroll to Use DNS server addresses → DNS-over-HTTPS and take note of the DNS-over-HTTPS URL (e.g., https://d.adguard-dns.com/dns-query/123456abc).

Generate a DNS stamp using the DNSCrypt DNS Stamp Calculator and set it.

  1. Protocol: DNS-over-HTTPS
  2. Host name: d.adguard-dns.com
  3. Path: /dns-query/123456abc (replace 123456abc with the value obtained from your AdGuard DNS Private Dashboard)
  4. Untick
    • No filter
    • No logs
  5. Copy the DNS stamp URL (e.g., sdns://AgcAAAAAA…)

Turn on DNS-over-HTTPS in UniFi.

  1. Inicia sesión en el controlador Ubiquiti UniFi.
  2. Go to Settings → Security.
  3. Click Protection.
  4. Proceed to Encrypted DNS → Custom and enter the following DNS server addresses.
    • Server Name: 'AdGuard DNS'
    • DNS Stamp: DNS stamp URL copied from above
  5. Haz clic en Guardar.

Utiliza el panel de administración del router​

Use these instructions if your UniFi router does not support the DNS-over-HTTPS or DNS-over-TLS configuration.

  1. Inicia sesión en el controlador Ubiquiti UniFi.
  2. Ve a Configuración → Redes.
  3. Haz clic en Editar Red → WAN.
  4. Proceed to Common Settings → DNS Server and enter the following DNS server addresses:
    • IPv4: 94.140.14.49 y 94.140.14.59
    • IPv6: 2a10:50c0:0:0:0:0:ded:ff y 2a10:50c0:0:0:0:0:dad:ff
  5. Click Save.
  6. Regresa a Red.
  7. Elige Editar Red → LAN.
  8. Busca Servidor de nombres DHCP y selecciona Manual.
  9. Introduce la dirección de tu puerta de enlace en el campo Servidor DNS 1. Alternatively, you can enter the AdGuard DNS server addresses in the DNS Server 1 and DNS Server 2 fields:
    • IPv4: 94.140.14.49 y 94.140.14.59
    • IPv6: 2a10:50c0:0:0:0:0:ded:ff y 2a10:50c0:0:0:0:0:dad:ff
  10. Guarda la configuración.
  11. Vincula tu IP (o tu IP dedicada si tienes una suscripción de equipo).