Přejít k hlavnímu obsahu

OPNSense

OPNSense firmware is often used to configure wireless access points, DHCP servers, DNS servers, allowing you to configure AdGuard DNS directly on the device.

Use your router admin panel

Use these instructions if your Keenetic router does not support DNS-over-HTTPS or DNS-over-TLS configuration:

  1. Open the router admin panel. It can be accessed at 192.168.1.1 or 192.168.0.1.
  2. Enter the administrator username (usually, it’s admin) and router password.
  3. Click Services in the top menu, then select DHCP Server from the drop-down menu.
  4. On the DHCP Server page, select the interface that you want to configure the DNS settings for (e.g., LAN, WLAN).
  5. Scroll down to DNS Servers.
  6. Choose Manual DNS. Select Use These DNS Servers or Specify DNS Server Manually and enter the following DNS server addresses:
    • IPv4: 94.140.14.49 and 94.140.14.59
    • IPv6: 2a10:50c0:0:0:0:0:ded:ff and 2a10:50c0:0:0:0:0:dad:ff
  7. Save the settings.
  8. Optionally, you can enable DNSSEC for enhanced security.
  9. Link your IP (or your dedicated IP if you have a Team subscription).